Ortofon 2MR Black cartridge (slim body)

Ortofon 2MR Black cartridge for Rega Turntable Specification :

Output voltage at 1000 Hz, 5cm/sec. - 5 mV
Channel balance at 1 kHz - 1 dB
Channel separation at 1 kHz - 26 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-20.000 + 2 / - 0 dB
Tracking ability at 315Hz at recommended tracking force - 80 µm
Compliance, dynamic, lateral - 22 µm/mN
Stylus type - Nude Shibata
Stylus tip radius - r/R 6/50 µm
Tracking force range - 1.4-1.7 g (14-17 mN)
Tracking force, recommended - 1.5 g (15 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1.2 kOhm
Internal inductance - 630 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 150-300 pF
Cartridge colour, body/stylus - Black/Black
2MR cartridge weight - 6 g

Ortofon 2MR Black cartridge for Rega Turntable Details :

Ortofon’s all-new2MR series features a low-profile body for convenient mounting on Rega turntables with no shims required.

Say goodbye to expensive counterweight upgrades and aftermarket shims - the 2MR makes it easier than ever.

The 2MR Black is graced with a Shibata diamond which slim, highly polished profile allows an exceedingly wide contact area to the groove walls and ensures notably detailed reproduction throughout the spectrum, including even the most high frequency groove information.

The 2MR Black uses a special upgraded engine, featuring split pole pins with a silver plated copper wire.

We have optimized the design for ease of mounting the cartridge, and the weight and size to fit the most common turntables on the market today.

The 2MR Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.