Rega Planar 10 REF / Aphelion 2 / Apheta 3 / or No Cartridge
- Estimated delivery: Sep 17 - Sep 21
-
Free shipping on all orders over $125
The Planar 10 was inspired by the ultimate Rega turntable, the Naiad. Built around our ultra-light skeletal plinth, constructed from Tancast 8 core and covered in a high-pressure laminate (HPL) skin. The Planar 10 is the first production turntable to use ceramic bracing which provides the ultimate rigid surface for mounting the precision reference RB3000 tonearm and custom central bearing assembly.
*New matt white finish available from April 2023 - The white Planar 10 is supplied as standard with a clear dustcover and black mat.
The heart of music
The Planar 10 is also fitted with a bespoke ceramic oxide platter which is diamond cut during manufacture for ultimate accuracy and speed stability. The Rega 24 V synchronous motor is controlled by our most advanced outboard power supply, the P10-PSU. This supply delivers the ultimate in motor vibration reduction, electronic fine speed adjustment and the convenience of electronic speed change. The Planar 10 is designed to deliver the ultimate in Rega performance by extracting more information from the vinyl groove than ever before.
The heart of music
The Planar 10 is also fitted with a bespoke ceramic oxide platter which is diamond cut during manufacture for ultimate accuracy and speed stability. The Rega 24 V synchronous motor is controlled by our most advanced outboard power supply, the P10-PSU. This supply delivers the ultimate in motor vibration reduction, electronic fine speed adjustment and the convenience of electronic speed change. The Planar 10 is designed to deliver the ultimate in Rega performance by extracting more information from the vinyl groove than ever before.
The PL10 PSU offers the ultimate in motor control stability, convenient electronic speed change, advanced anti-vibration control and user adjustable electronic fine speed adjustment to ensure total accuracy and control over the life of the motor.
Housed in Rega’s latest custom-designed case, the PL10 PSU is dedicated to running our 24v, low noise motor as quietly and as accurately as possible. The speed and control of the motor is achieved by using a new DSP (Digital Signal Processing) generator built upon a high stability crystal. This device will divide the accurate square wave from the crystal to the exact frequency required to turn the platter at the selected speed.
The DSP core will also generate a near perfect sinusoidal waveform to power the motor. Factory set vibration removal and fine speed adjustments are then made to the power supply to tune each motor for optimal performance.
The P10 uses a custom ceramic, flywheel effect platter. The platter is produced from ceramic oxide powder which is compressed, fired and diamond cut to ensure perfect accuracy and flatness across the surface. The latest platter features a modified construction with improved coupling to the sub-platter.
Rega is renowned for the quality of its tonearm bearing assemblies. In particular the accurate manufacturing of our bearing housing and bearing spindles. Technical characteristics such as “roundness” and “parallelity” are critical.
Over the past three years, Rega has found a new manufacturing process which improves on all these characteristics resulting in a micron perfect bearing fit. The RB3000 is the first Rega arm to benefit from these improvements. The entire tonearm structure is designed to have the minimum of mechanical joints while using the stiffest materials in all critical areas.
The tolerance of the RB3000 tonearm is so tight that no adhesive is used at any point throughout the construction. Our latest low mass, precision engineered, vertical bearing assembly has been manufactured to further complement the inherent design philosophy of the Planar 10 turntable.
The RB3000 tonearm uses our advanced, preloaded zero tolerance bearing assembly adjusted to less than 1000th of a mm. This gives friction-free movement and zero levels of unwanted play. Simply put, friction-free bearings with no play enable ridges in the record groove of less than a micron to be read.
The RB3000 also uses our latest award-winning, aluminium, Rega arm tube (each one of which is meticulously hand polished, keeping mass to an absolute minimum) which was redesigned to redistribute mass and further reduce stresses and resonances. This advanced design tube increases the stiffness and rigidity of the overall assembly whilst reducing stress on the bearings even further.
Technical Specifications
- Planar 10 Turntable Dimensions (W x H x D)
-
420 x 115 x 350 mm (with dust cover fitted)
- P10 PSU Dimensions (W x H x D)
-
218 x 80 x 320 mm
- Turntable Weight
-
4.7 kg
- P10 PSU Weight
-
3 kg
Talk about hifipro
It was in 2016 that the idea of an e-commerce site for the sale of new products was born: HIFIPRO. Mario Gagnon, owner of the second-hand Audio store since 1985, nurtured his passion for music since childhood. This enthusiasm allowed him to excel in his studies and projects. Dedication, time and love for sound and its reproduction led him to open his own store. It will quickly become a reference in the sale of high fidelity devices in Canada. He and his colleagues spend a lot of time following progress and new developments in order to stay up to date with the latest technologies. After more than 30 years of success, Used Audio has acquired a very loyal customer base, participated in and obtained several recognitions from consumers and professionals during several exhibitions. For several years now, they have been shipping items across Canada, so Mario decided to create HIFIPRO. It is with great confidence that he and his team are ready to offer you the best products and services. Our goal is to help you make the best possible choice according to your needs and criteria.
CONTACT US
Mario Gagnon
Mario@hifipro.ca
www.hifipro.ca
514-522-2020
1-888-738-HIFI
1325 Ontario est Montréal
QC,H2L 1R8
